Are you dealing with condensation in your garage? If so, Neighborhood Garage Door Services of San Antonio has put a guide of how you can install vents on your garage door in order to reduce the condensation.
One of the ways to eliminate this problem is to have good airflow in your garage. In order to achieve that, you can install vents on your garage door.
Mark The Position of the Vents
Mark with your pencil or pen where you will plan to place the vents. It is best to place the vents at the top of the overhead door. You can draw around the outline of the vent as a guide to go by. Make sure that you drill inside of the outline about an inch in away from the line. This way, when it is time to screw the vent in place, it should cover the holes.
Wear Safety Glasses When Cutting Into a Garage Door
It is important that you wear safety glasses when you are cutting into your overhead garage door. Regardless of whether you have a wooden or metal door, you will want to have on eye protection. Since you will need to reach up to drill the holes, the dust from the holes can get into your eyes more easily.
Wearing a mask might be a good idea, also. If you have a home that is older than 1989, you are at risk for coming in contact with asbestos. It is best to limit your exposure to this substance as much as possible. By wearing a mask, you will not breathe in the dust and particles from drilling.
Drill a Series of Holes
All you will need to do is drill holes into the door, instead of cutting it out completely. The goal is to increase the airflow in your garage. Also, it is much easier to drill holes versus cutting a hole into the door. You have less chances of damaging it through this process.
Drill the holes close together. It is best to make a grid pattern with the way you drill the holes. An easy way to do this is to drill columns going across the vent shape or down the vent shape.
Place Vent Over The Holes
Once you are done drilling the holes, you will need to install the vent over top of them. Make sure that you align it in such a way that you are covering everything you drilled. Also, make sure you are not placing the screw holes over top of the holes you drilled into the door.
This process shouldn’t take you more than an hour, but will help your garage to get the airflow that it needs. If you are seeing condensation inside, this can solve your problem.
If you are still having an issue with airflow, you may need to install an exhaust fan in your garage in order to pull more air out of the room. Another solution can be to run a dehumidifier in your garage. This machine will pull the water out of your air, reducing condensation.
Call Us Today
Should you need assistance with this project or have other overhead door needs, call Neighborhood Garage Door of San Antonio, TX today. We can get someone to your home right when you need them most.